

Reference : T-6
Power : 12 V DC
Low power: 0.2mA.
Maximum consumption: 400 mA.
Current minimum. Input : 10mA
Low voltage. Input : 3 V DC
max Input. : 24VDC
max Relay output: 7A (2A for inductive loads)
Reverse polarity protection: Yes.
Sizes : 155 x 72 x 27mm
Weight : 148.5gr
DIN rail : C-7572
Interfaces with 8 relay outputs.
Through optocouplers, the T-1, T-4, T-5 and T-6 modules will electrically isolate the control signals of each input, from the one connected to the outputs.
By injecting a signal between 3 and 24 VDC on any input, the corresponding output will activate, remaining in that state until the input voltage drops to 0.
They incorporate terminals and signaling LEDs.
Recommended power supply FE-123
Recommended din rail C-7572
See PDF
You might also like
Reference : T-6
Power : 12 V DC
Low power: 0.2mA.
Maximum consumption: 400 mA.
Current minimum. Input : 10mA
Low voltage. Input : 3 V DC
max Input. : 24VDC
max Relay output: 7A (2A for inductive loads)
Reverse polarity protection: Yes.
Sizes : 155 x 72 x 27mm
Weight : 148.5gr
DIN rail : C-7572