

Reference : C-7248
Suitable for : CLEAN WATER, WATER, ACIDS DILUTED
Mounting Type : Vertical installation
Working pressure : ≤ 0.5 MPa
Relative density of the buoy : 0.7
Output Type : 1 voltage free contact
Contact capacity : 24 V DC / 0.5 A
Temperature range : -20 ~ 80 ° C
Float material : Polypropylene (PP)
Sensor material : Polypropylene (PP)
Degree of protection : IP68
Buoy dimensions : Ø18 x 8 mm
Fixing the tank: : M8
Dimensions : Ø18 x 38 mm
Connection : cable 500 mm (± 10mm)
The sensor is a non-magnetic metal sealed system.
The sensor is fixed to the tank with a non-rusting nut, so that the magnetic buoy floats freely up and down.
When the float drops to the minimum level, the internal REED switch contacts close.
The standard contacts are normally open (NO) as long as the liquid does not reach the minimum level.
These sensors are widely used in liquid level control and alarm in all kinds of industries, such as power electronics, electronics, chemical, water treatment, water supply and drainage, due to their low price, reliable performance and its flexible method of installation .
See PDF
You might also like
Reference : C-7248
Suitable for : CLEAN WATER, WATER, ACIDS DILUTED
Mounting Type : Vertical installation
Working pressure : ≤ 0.5 MPa
Relative density of the buoy : 0.7
Output Type : 1 voltage free contact
Contact capacity : 24 V DC / 0.5 A
Temperature range : -20 ~ 80 ° C
Float material : Polypropylene (PP)
Sensor material : Polypropylene (PP)
Degree of protection : IP68
Buoy dimensions : Ø18 x 8 mm
Fixing the tank: : M8
Dimensions : Ø18 x 38 mm
Connection : cable 500 mm (± 10mm)